View source for MUI Subclassing Tutorial: SciMark2 Port

''Grzegorz Kraszewski''


==The Application==
Many programming tutorials tend to bore readers with some useless examples. In this one a "real world" application will be ported to MorphOS and "MUI-fied". The application is [http://math.nist.gov/scimark2/index.html SciMark 2]. SciMark is yet another CPU/memory benchmark. It performs some typical scientific calculations like Fast Fourier Transform, matrix LU decomposition, sparse matrix multiplication and so on. The benchmark measures mainly CPU speed at floating point calculations, cache efficiency and memory speed. Being written in Java initially, it has been rewritten in C (and in fact in many other languages). The C source is available on the [http://math.nist.gov/scimark2/download_c.html project homepage].

The source uses only pure ANSI C standard, so it is easily compilable on MorphOS using provided ''Makefile''. One has just replace ''$CC = cc'' line to ''$CC = gcc'', to match the name of the MorphOS compiler. As a result, a typical shell-based application is obtained. Here are example results for a Pegasos 2 machine with G4 processor:


[[File: scimark_cli_noopt.png|center]]


Not very impressive in fact. This is because no optimizaton flags are passed to the compiler in the makefile. They can be added by inserting a line ''$CFLAGS = -O3'' below the ''$CC = gcc'' one. Let's also link with ''libnix'' (a statically linked unix environment emulation, see [[Installation_of_Software_Development_Kit_and_its_basic_usage#Standard_C_and_C.2B.2B_Libraries|Standard C and C++ Libraries]]) by adding ''-noixemul'' to ''CFLAGS'' and ''LDFLAGS''. After rebuilding the program and running it again the results are significantly improved (the program has been compiled with GCC 4.4.4 from the official SDK).


[[File: scimark_cli_opt.png|center]]


This shows how important is optimization of the code, especially computationally intensive one. Optimized code is '''more than 4 times faster'''!


==Code Inspection==
The original source code is well modularized. Five files: ''FFT.c'', ''LU.c'', ''MonteCarlo.c'', ''SOR.c'' and ''SparseCompRow.c'' implement the five of single benchmarks. Files ''array.c'' and ''Random.c'' contain auxiliary functions used in benchmarks. File ''Stopwatch.c'' implements time measurement. An important file ''kernel.c'' gathers all the above and provides five functions performing complete benchmarks with timing. Finally ''scimark2.c'' contains the ''main()'' function and implements the shell interface.

A planned MUI interface should allow to run every benchmark separately and run all of them. There is also ''-large'' option, which increases memory sizes of calculated problems, so they do not fit into the processor cache. A general rule of porting is that as few files as possible should be modified. The rule makes it easier to upgrade the port when a new version of original program is released. In the case of SciMark, only one file, ''scimark2.c'' has to be replaced. An advanced port may also replace ''Stopwatch.c'' with code using ''timer.device'' directly for improved time measurements accuracy, this is out of scope of this tutorial however.

A closer look at "scimark2.c" reveals that there is a ''Random'' object (a structure defined in "Random.h"), which is required for all the benchmarks. In the original code it is created with ''new_Random_seed()'' at the program start and disposed with ''delete_Random()'' at exit. The best place for it in the MUI-fied version is the instance data area of subclassed ''Application'' class. Then it can be created in ''OM_NEW()'' of the class and deleted in ''OM_DISPOSE()''. These two methods should be overridden then.


==GUI Design==
[[File:scimark_gui.png|left]] Of course there is no one and only proper GUI design for SciMark. A simple design, using a limited set of MUI classes is shown on the left. There are five buttons for individual benchmarks and one for running all of them. All these buttons are instances of the ''Text'' class. On the right there are gadgets for displaying benchmark results. These gadgets belong to ''Text'' class too, just having different attributes. The "Large Data" button, of ''Text'' class of course, is a toggle one. Surprisingly the status bar (displaying "Ready.") is not an instance of the ''Text'' class, but ''Gauge'' class. Then it will be able to display a progress bar when running all five tests. Spacing horizontal bars above the "All Benchmarks" button are instances of the ''Rectangle'' class. There are also three invisible objects of the ''Group'' class. The first is a vertical, main group, being the root object of the window. It contains two sub-groups. The upper one is the table group with two columns and contains all the benchmark buttons and result display gadgets. The lower group contains "Large Data" toggle button and the status bar.

The simplest way to start with GUI design is just to copy the "Hello World" [["Hello world!" in MUI|example]]. Then MUI objects may be added to ''build_gui()'' function. The [http://krashan.ppa.pl/morphzone_tutorials/scimark2_mui.c modified example] is ready to compile and run. It is not a complete program of course, just a GUI model without any functionality added.

A quick view into the ''build_gui()'' function reveals that it does not contain all the GUI code. Code for some subobjects is placed in functions called from the main ''MUI_NewObject()''. Splitting the GUI building function into many subfunctions has a few important advantages:
* Improved code readability and easier modifications. A single ''MUI_NewObject()'' call gets longer and longer quickly as the project evolves. Editing a large function spanning over a few screens is uncomfortable. Adding and removing GUI objects in such a function becomes nightmare even with indentation used consequently. On the other hand the function can have 10 or more indentation levels, which makes it hard to read as well.
* Code size reduction. Instead of writing very similar code multiple times, for example buttons with different labels, a subroutine may be called with label as an argument.
* Debugging. It happens sometimes that MUI refuses to create the application object because of some buggy tags or values passed. If the main ''MUI_NewObject()'' call is splitted into subfunctions, it is easy to isolate the buggy object by inserting some ''Printf()''-s in subfunctions.


==Methods and Attributes==
The SciMark GUI just designed, defines six actions of the application. There are five actions of running individual benchmarks and the sixth one of running all the tests and calculate the global result. Actions will be directly mapped to an ''Application'' subclass methods. There is also one attribute connected with "Large Data" button, it determines sizes of problems solved by benchmarks. Methods do not need any parameters, so there is no need to define method messages. An attribute may be applicable at init time (in the object constructor), may be also settable (needs ''OM_SET()'' [[Overriding OM_SET()|method overriding]]) and gettable (needs ''OM_GET()'' [[Overriding OM_GET()|method overriding]]). Our new attribute, named ''APPA_LargeData'' in the code only needs to be settable. In the constructor it can be implicitly set to ''FALSE'', as the button is switched off initially. Gettability is not needed, because this attribute will be used only inside the ''Application'' subclass.

It is recommended that every subclass in the application is placed in a separate source file. It helps to keep code modularity and also allows for [[Short BOOPSI Overview#Classes|hiding class private data]]. This requires writing a makefile, but one is needed anyway, as the original SciMark code consists of multiple files. Implementing the design directions discussed above a [http://krashan.ppa.pl/morphzone_tutorials/scimark2_application.h class header file] and [http://krashan.ppa.pl/morphzone_tutorials/scimark2_application.c class code] can be written. The class still does nothing, just implements six empty methods and overrides ''[[Overriding OM_SET()|OM_SET()]]'', ''[[Overriding Constructors|OM_NEW()]]'' and ''[[Overriding Destructors|OM_DISPOSE()]]''. In fact it is a boring template work and as such it has been generated with [http://downloads.morphzone.org/find.php?find=chocolatecastle ChocolateCastle] template generator. Unfortunately ChocolateCastle is still beta, so files had to be tweaked manually after generation.

The next step in the application design is to connect methods and attributes with GUI elements using [[Event Driven Programming, Notifications#Notifications in MUI|notifications]]. Notifications must be of course created after both source and target object are created. In the SciMark code they are just set up after executing ''build_gui()''. All the six action buttons have very similar notifications, so only one is shown here:

 DoMethod(findobj(OBJ_BUTTON_FFT, App), MUIM_Notify, MUIA_Pressed, FALSE,
  App, 1, APPM_FastFourierTransform);

"Large Data" button has a notification setting the corresponding attribute:

 DoMethod(findobj(OBJ_BUTTON_LDATA, App), MUIM_Notify, MUIA_Selected, MUIV_EveryTime,
  App, 3, MUIM_Set, APPA_LargeData, MUIV_TriggerValue);

Notified objects are accessed with [[Locating Objects in the Object Tree|dynamic search]] (the ''findobj()'' macro), which saves from defining global variables for all of them.


==Implementing Functionality==
Five methods implementing single SciMark benchmarks are very similar, so only one, running the Fast Fourier Transform has been shown:

 IPTR ApplicationFastFourierTransform(Class *cl, Object *obj)
 {
   struct ApplicationData *d = INST_DATA(cl, obj);
   double result;
   LONG fft_size;
 
   if (d->LargeData) fft_size = LG_FFT_SIZE;
   else fft_size = FFT_SIZE;
 
   SetAttrs(findobj(OBJ_STATUS_BAR, obj),
     MUIA_Gauge_InfoText, (LONG)"Performing Fast Fourier Transform test...",
     MUIA_Gauge_Current, 0,
   TAG_END);
 
   set(findobj(OBJ_RESULT_FFT, obj), MUIA_Text_Contents, "");
   set(obj, MUIA_Application_Sleep, TRUE);
   result = kernel_measureFFT(fft_size, RESOLUTION_DEFAULT, d->R);
   NewRawDoFmt("%.2f MFlops (N = %ld)", RAWFMTFUNC_STRING, d->Buf, result, fft_size);
   set(findobj(OBJ_RESULT_FFT, obj), MUIA_Text_Contents, d->Buf);
   set(obj, MUIA_Application_Sleep, FALSE);
   set(findobj(OBJ_STATUS_BAR, obj), MUIA_Gauge_InfoText, "Ready.");
   return 0;
 }

The code uses [[Locating Objects in the Object Tree|dynamic object tree search]] for accessing MUI objects.

The method sets the benchmark data size first, based on ''d->LargeData'' switch variable. This variable is set with ''APPA_LargeData'' attribute, which in turn is bound to the "Large Data" button via notification. Then the status bar progress is cleared and a text is set to inform a user what is being done. The result textfield for the benchmark is cleared as well.

The next step is to put the application in the "busy" state. It should be always done, when the application may be not responding for user input for a time longer than, let's say half a second. Setting ''MUIA_Application_Sleep'' to ''TRUE'' locks the GUI and displays the busy mouse pointer, when the application window is active. Of course offloading processor intenstve task to a subprocess is a better solution in general case, but for a benchmark it makes little sense. A user has to wait for the benchmark result anyway before doing anything else, like starting another benchmark. The only usablility problem is that a benchmark can't be stopped before it finishes. Let's leave it as is for now, for a benchmark, where the computer is expected to use all its computing power for benchmarking, a few seconds of GUI being unresponsive is not such a big problem.

The next line of code runs the benchmark, by calling ''kernel_measureFFT()'' function from the original SciMark code. After the benchmark is done, the result is formatted and displayed in the result field using ''NewRawDoFmt()'', which is a low-level string formatting function from ''exec.library'' and with ''RAWFMTFUNC_STRING'' constant works just like ''sprintf()''. It uses a fixed buffer of 128 characters (which is much more than needed, but adds a safety margin) located in the object instance data. Unsleeping the application and setting status bar text to "Ready." ends the method.

The ''APPM_AllBenchmarks()'' method code is longer so it is not repeated here. The method is very similar to a single benchmark one anyway. The difference is it runs all 5 tests accumulatig their results in a table. It also updates the progress bar after every benchmark. Finally it calculates a mean score and displays it.


==Final Port==
[http://krashan.ppa.pl/morphzone_tutorials/scimark2_mui.lha The complete source of SciMark2 MUI port]

The program may be built by running ''make'' in the source directory.