MorphOS Library - User contributions [en]

Recording an LP with Audio Evolution 4

2012-04-13T21:11:15Z

Realstar: /* Things You Will Need */

''Author: Kelly Samel (realstar@shaw.ca)''

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# A copy of AudioEvolution 4 software for MorphOS, Amiga OS 4 or AROS 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

=== Converting to MP3 files ===

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Main Page

2012-04-13T18:47:49Z

Realstar: Added tutorial Recording an LP with Audio Evolution 4 to main page

__NOTOC__

<div id="siteLogo" style="float: right;"> </div>

<div style="font-size:162%; border:none; margin:0; padding:.1em; color:#274572;">Welcome to the MorphOS Library,</div>
<div style="top:+0.2em; font-size:95%;">the wiki based library of MorphOS related documentation.</div>

Do you have suggestions or would like to contribute? Please contact: <div id="message2library"></div>

'''Important notes to editors:''' [[Basic Guidelines]] - [[List of Wanted Articles]]

----
This page in other languages: [[Strona główna|Polish]]

==About MorphOS==
MorphOS - The Lightning OS
* [[What is MorphOS?]]
* [[Hardware Platforms]]
* [[Installation]]
* [[Characteristic features]]
* [[MorphOS integration]]
* [[MorphOS Development]]
* [[Developer tools]]
* [[3D graphics]]
* [[Games]]
* [[MorphOS key applications]]
* [[Platform expansion]]
* [[Who needs MorphOS?]]
* [[Conclusions]]
* [[Useful links]]
* [[F.A.Q.]]
* [[Historical notes]]
* [[Contributors]]
A five minute read for users familiar with the Commodore Amiga
*[[MorphOS in 5 minutes]]

==Articles==
The core of the MorphOS Library can be found here. Along with the provided manuals, there are several documents designed to help users get the most out of their MorphOS powered computer.

* [[Fundamentals of MorphOS]]
* [[Dictionary of Terms]]
* [[Shell Commands|Shell: Commands]]
* [[Pattern matching|Shell: Pattern Matching]]
* [[Volume Names]]

==Tutorials==
Welcome to the Tutorials section of the MorphOS Library. In this aisle of the library you can find examples and step by step instructions to help get the most out of your MorphOS experience.

*[[Modifying the User-Startup file]]
*[[Dual-boot MorphOS and MacOS X on a Mac Mini G4]]
*[[How to write Mails with SimpleMail]]
*[[MorphOS External USB Drive Backup Guide]]
*[[Scanning with SCANdal]]
*[[Recording an LP with Audio Evolution 4]]

==Development==
In the development section of the MorphOS Library, you can find a collection of helpful articles and tutorials focused on MorphOS software development.

*[[First steps in MorphOS programming]]
*[[Magic User Interface Programming]]
*[[In-depth: The New MorphOS Memory System]]
*[[Reggae: MorphOS multimedia framework]]
*[[An Introduction to MorphOS PPC Assembly]]

==Benchmarks, Reports & Reviews==
*[[jPV's MorphOS 2 Review]]

==Links==
The MorphOS Link Database is a collection of websites that are of interest to all current and potential future users of MorphOS. For easier navigation, we have separated the list of websites into multiple categories.

*[[Links#Community_Portals_.26_Forums|Community Portals]]
*[[Links#File_Repositories|File Repositories]]
*[[Links#Software|Software]]
*[[Links#Developers|Developers]]
*[[Links#Misc|Misc]]

==Work in Progress==
*[[ReTooled]]

Recording an LP with Audio Evolution 4

2012-04-13T18:42:16Z

Realstar:

''Author: Kelly Samel (realstar@shaw.ca)''

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

=== Converting to MP3 files ===

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Recording an LP with Audio Evolution 4

2012-04-13T18:41:46Z

Realstar:

'''Author': Kelly Samel (realstar@shaw.ca)''

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

=== Converting to MP3 files ===

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Recording an LP with Audio Evolution 4

2012-04-13T18:33:23Z

Realstar:

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

=== Converting to MP3 files ===

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Recording an LP with Audio Evolution 4

2012-04-13T18:31:47Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

=== Converting to MP3 files ===

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Recording an LP with Audio Evolution 4

2012-04-13T18:31:24Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
for good quality MP3 playback.

== Links ==
Audio Evolution 4 http://www.audio-evolution.com 
Onyx Soft Code Audio http://www.onyxsoft.se/codeaudio.html 
Lame MP3 encoder http://aminet.net/mus/misc/lame-morphos.lha

Recording an LP with Audio Evolution 4

2012-04-13T18:26:09Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program CodeAudio (formerly named:TheMpegEncGUI)
in conjunction with the lame mp3 encoder. You can specify a list of input files where you can
select the AIFF files that you previously saved to disk and then you can batch encode the lot
of them in one fell swoop. I suggest using joint stereo 256Kbps and high quality (-h) mode
encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:16:17Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it once. Pressing the delete key on your
keyboard or right clicking and selecting "Remove" from the popup menu will delete the section.
Presto it's gone and we are left with only the part we wanted to keep. You can now scroll to the
end of the audio data and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:13:40Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the section containing the empty lead in by clicking on it. Then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left with
only the part we wanted to keep. You can now scroll to the end of the audio data and using a
similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:12:57Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the sample containing the empty lead in by clicking on it. Then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left with
only the part we wanted to keep. You can now scroll to the end of the audio data and using a
similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:12:36Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split point was made. You can
select the sample containing the empty lead in by clicking on it. Then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left with
only the part we wanted to keep. You can now scroll to the end of the audio data and using a
similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:08:36Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice we have two pieces of audio data sitting next to each
other at the split point. Each section of audio data is labeled. One section to the
left and one section to the right of where the split line was positioned. Simply
click the section containing the empty lead in to select it and then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left
with only the part we wanted to keep. You can now scroll to the end of the audio data
and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:06:46Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice we have two pieces of audio data sitting next to each
other at the split point each with it's own label in the upper left corner. One section
to the left and one section to the right of where the split line was positioned. Simply
click the section containing the empty lead in to select it and then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left
with only the part we wanted to keep. You can now scroll to the end of the audio data
and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:03:33Z

Realstar: /* Trimming lead in and lead out */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point each with a named label in the upper left corner. One section
to the left and one section to the right of where the split line was positioned. Simply
click the section containing the empty lead in to select it and then press the delete key
or right click and select "Remove" from the popup menu. Presto it's gone and we are left
with only the part we wanted to keep. You can now scroll to the end of the audio data
and using a similar process remove the empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T18:00:38Z

Realstar: /* Launching the Software */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window|none|frame|Start a new project]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:58:33Z

Realstar: /* Viewing and playing back the audio waveform */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand tracks]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:52:13Z

Realstar: /* Viewing and playing back the audio waveform */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons|none|frame|Expand track]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar|none|frame|Zoom level]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar|none|frame|Scroll bar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon|none|frame|Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker|none|frame|Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:44:10Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:40:58Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking directly on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names with track
numers. (01 firstsong.aiff, 02 second song.aiff, 03 third song.aiff...etc.) Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP.
Now you can repeat this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:40:32Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names with track
numers. (01 firstsong.aiff, 02 second song.aiff, 03 third song.aiff...etc.) Congratulations you
have now recorded, trimmed and saved out all of the songs from one side of an LP.
Now you can repeat this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:38:47Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split up into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations
you have now recorded, trimmed and saved out all of the songs from one side of an LP.
Now you can repeat this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:38:23Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split into individual audio sections we can
go ahead and start to save them out to disk as AIFF samples. Select the song you want to save
out by clicking on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations
you have now recorded, trimmed and saved out all of the songs from one side of an LP.
Now you can repeat this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:37:25Z

Realstar: /* Saving the audio tracks */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now that all of the songs have been split into individual audio sections we can
go ahead and start to save them out to disk in AIFF format. Select the song you want to save
out by clicking on the section containing it and then right click and select "Save To Disk" from
the popup menu. Do this for each song and give the tracks meaningful file names. Congratulations
you have now recorded, trimmed and saved out all of the songs from one side of an LP.
Now you can repeat this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-13T17:28:37Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks on that. In either case your
audio output cable should then be connected to the 3.5mm mini jack adaptor. Next you need to
find the line in jack on the back of your computer. This is usually colored blue. Plug the 3.5mm
mini plug into this port. OK. Everything is now connected to start recording audio into your
computer.

[[File:ae4_linein.png|alt=LineIn]]
[[File:ae4_taperec.png|alt=TapeRec]]

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select an audio mode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos computer using internal audio
would use "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check box next to the Left and Right
input levels to begin monitoring the input. Now put an LP on your turntable and start playing the record.
You should be able to see the colored level meters moving back and forth. This indicates the strength of
the audio signals your computer is receiving. If the meters are moving then the audio from your turntable
is coming in fine and you are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio information that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it an appropriate filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform by clicking on the play icon
within the control window or by pressing the space bar. Pressing the
stop icon or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking the timing ruler
just above the waveform display. You can also click and drag the green
time marker for fine adjustment of your current playing position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in area at the beginning
of our LP side. So we need to find out where the first song starts by
looking at the waveform visually and by listening. We then want to seperate
this lead-in area from the actual start of the first song. We will use the split
tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the section containing the empty lead in
to select it and then press the delete key or right click and select "Remove" from the
popup menu. Presto it's gone and we are left with only the part we wanted to keep.
You can now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our first LP side with the lead in and lead out
trimmed off. Next we want to split this one big waveform into individual song tracks. This is
easily achieved by finding the silent gaps between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
split sections beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the section containing it
and then right clicking and selecting the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

File:Ae4 taperec.png

2012-04-13T16:45:58Z

Realstar:

File:Ae4 linein.png

2012-04-13T16:45:39Z

Realstar:

Recording an LP with Audio Evolution 4

2012-04-13T16:43:53Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

[[File:ae4_turntable.png|alt=Turntable]]
[[File:ae4_phonostage.png|alt=Phono stage]]
[[File:ae4_adaptor.png|alt=3.5mm adaptor]]
[[File:ae4_rcacable.png|alt=rca cable]]
[[File:ae4_receiver.png|alt=Receiver]]
[[File:ae4_audioevolution.png|alt=Audio Evolution 4]]

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks. In either case the audio output
cable should then be connected to the 3.5mm mini jack adaptor. On the back of your computer you
need to find the line-in jack. This is usually colored blue. Plug the 3.5mm mini plug into this port.
OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform display. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

File:Ae4 audioevolution.png

2012-04-13T16:43:19Z

Realstar:

File:Ae4 receiver.png

2012-04-13T16:39:02Z

Realstar:

File:Ae4 rcacable.png

2012-04-13T16:33:43Z

Realstar:

File:Ae4 phonostage.png

2012-04-13T16:33:24Z

Realstar:

File:Ae4 adaptor.png

2012-04-13T16:32:59Z

Realstar:

File:Ae4 turntable.png

2012-04-13T16:32:35Z

Realstar:

Recording an LP with Audio Evolution 4

2012-04-11T22:59:11Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks. In either case the audio output
cable should then be connected to the 3.5mm mini jack adaptor. On the back of your computer you
need to find the line-in jack. This is usually colored blue. Plug the 3.5mm mini plug into this port.
OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform display. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:57:29Z

Realstar: /* Viewing and playing back the audio waveform */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks. In either case the audio output
cable should then be connected to the 3.5mm mini jack adaptor. On the back of your computer you
need to find the line-in jack. This is usually colored blue. Plug the 3.5mm mini plug into this port.
OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform display. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF audio files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:54:00Z

Realstar: /* Getting Started */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks. In either case the audio output
cable should then be connected to the 3.5mm mini jack adaptor. On the back of your computer you
need to find the line-in jack. This is usually colored blue. Plug the 3.5mm mini plug into this port.
OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF audio files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:51:10Z

Realstar: /* Tutorial for Audio Evolution 4 - Transferring an LP to your computer */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Recording a vinyl LP into your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF audio files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:50:04Z

Realstar: /* Tutorial for Audio Evolution 4 - Transferring an LP to digital */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to your computer ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF audio files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:48:40Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI in conjunction
with the lame mp3 encoder. You can specify a list of input files where
you can select the AIFF audio files that you previously saved to disk and
then you can batch encode the lot of them in one fell swoop. I suggest
using joint stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:46:51Z

Realstar: /* Converting to MP3 files */

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell swoop. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:42:47Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Breaking up the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell step. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:38:57Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play. If you are
using a receiver or integrated amp then you need an RCA audio extension cable plugged into the
TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand alone
phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Seperating the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell step. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:35:18Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play.

If you are using a receiver or integrated amp then you need an RCA audio extension cable plugged
into the TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand
alone phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One "box" to the left and one "box" to the right of where
the split line was positioned. Simply click the "box" containing the lead in to select
it and then press the delete key or right click and select "Remove" from the menu.
Presto it's gone and we are left with only the parts we wanted to keep. You can
now scroll to the end of the audio data and using a similar process remove the
empty lead out section at the end of the LP.

=== Seperating the audio tracks ===
At this point we have the complete audio from our LP side with the lead in and lead outs
trimmed off. Next we want to split the one big waveform into individual song tracks. This is
easily achieved by finding the silent parts between each song both visually and by listening
and then making a split just before the start of each song. You should end up with several
"boxes" beside each other, one for each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select a song by clicking on the "box" containing it
and then right click and select the 'Save To Disk' option. Do this for each song
and give the tracks meaningful file names. Congratulations you have now recorded,
trimmed and saved out all of the songs from one side of an LP. Now you can repeat
this prodedure for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell step. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:24:20Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play.

If you are using a receiver or integrated amp then you need an RCA audio extension cable plugged
into the TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand
alone phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

[[File:ae4_split.png|alt=Split file tool|frame|left|Split mode]]

[[File:ae4_grabmove.png|alt=Grab move tool|frame|left|Grab / move mode]]

First thing we need to do is trim off the empty lead in at the beginning
of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

Put the editor into split mode by clicking on the split icon. Now as
you hover the mouse pointer over the waveform display you will
see a dotted line that demonstrates where a split can be made.

Line up the dotted line just before the start of the first song and click once.
Change the edit mode back to grab/move before continuing just so you
don't accidentally make more splits by clicking on the waveform again.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Now you may notice that we have two pieces of audio data sitting next to each
other at the split point. One section to the left and one section to the right of where
the split line was positioned. Simply click the lead in section to select it and then
press the delete key or right click and select Remove from the menu. Presto it's
gone and we are left with only the part we wanted to keep. You can now scroll to
the end of the audio data and using a similar process remove the empty lead out
section at the end of the LP.

=== Seperating the audio tracks ===
At this point we are have the complete audio that we want to keep
with the lead in and lead out trimmed off. Next we want to split
the one large waveform into seperate song tracks. This is easily
achieved by finding the silent parts between each song track
visually and listening and then making a split just a little
before the start of each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select each song by clicking on the sample
data once and then right clicking and selecting the 'Save To Disk'
option for each track. Give the tracks meaningful names like this.
Congratulations you have now recorded, trimmed and saved out all
of the songs from one side of an LP. Now you can repeat this prodedure
for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell step. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

Recording an LP with Audio Evolution 4

2012-04-11T22:10:16Z

Realstar:

PAGE UNDER CONSTRUCTION - EDITS TO COME

----

== Tutorial for Audio Evolution 4 - Transferring an LP to digital ==

If your like me you have a nice collection of vinyl LPs that you like to listen to but sometimes the portability of having mp3 files is also a
good thing. The answer is to digitize your vinyl collection and put the songs on your computer. So here is an explanation of my method for
doing so using Audio Evolution 4.0.23.

== Things You Will Need ==

# A turntable 
# A stand alone phono preamp or amplifier/receiver with phono inputs 
# A stereo RCA to 3.5mm mini jack adaptor 
# An RCA extension audio cable long enough to reach your computer 
# MorphOS and a copy of AudioEvolution 4 

== Getting Started ==

First thing is to make sure your turntable is connected to your phono stage/amplifier correctly.
Also ensure it is setup correctly with a good stylus and some clean records to play.

If you are using a receiver or integrated amp then you need an RCA audio extension cable plugged
into the TAPE REC OUT jacks on the back of the unit. (this may vary by model) If you have a stand
alone phono preamp then plug your audio cord directly into the output jacks.

In either case the audio output cable should then be connected to the 3.5mm mini jack adaptor.

On the back of your computer you need to find the line-in jack. This is usually colored blue.
Plug the 3.5mm mini plug into this port.

OK. Everything is now connected to start recording audio into your computer.

== Launching the Software ==

[[File:SelectAudioMode.png|alt=Select Audio Mode|right|frame|Select an audio mode]]

[[File:ae_soundio.png|alt=Soundio window|right|frame|Make sure you are recording from line in]]

=== Select a screenmode ===
Start Audio Evolution 4 software and select an approprate screenmode. When it asks what audio mode
you want to use select the appropriate option for your machine. If you have an external soundblaster card
for instance then "EMU10kx HiFi 16 bit stereo++" would be correct. A Pegasos using internal audio would
need "Pegasos: HiFi 16 bit stereo++". I would suggest 44100 as the sampling rate as this matches CD audio
quality and will translate well to the MP3 format.

=== Start a new project ===
Now select Start a new project and give your project a name in the filerequestor. Keep in mind that your
project location is where all recorded audio samples will reside so make sure you have at least a couple GB
of free space.

=== Set audio card input source ===
Under (menu item: Options->Soundcard in/out) make sure input is set to line in.
Now is also a good time to save your preferences. (menu item: File->Save preferences)

[[File:ae4_welcome.png|alt=Welcome window]]

== Preparing to Record ==

=== Find the control window ===
Next step is to find the Control window. This is often hidden beneath the Time Line Display window
when you first start the application so use the depth gadgets to reveal it.

[[File:ae4_control.png|alt=Control window]]

=== Testing the input ===
Now press the red record icon to open the recording panel. Click the check gadget next to the Left and Right
input levels. Now put an LP on your turntable and start playing the record. You should be able to see how
much input you are getting into the Left and Right channels. If you see the colored meters moving then
you are recieving audio from your turntable and are nearly ready to record.

[[File:ae4_record.png|alt=Record window]]

=== Setting correct gain ===
If the L/R levels appear too low you may have to increase the gain setting. I found a gain setting around
15 to be good for most of my recordings. The correct value will vary a little depending on your equipment
and the record you are playing. You want to keep the level meters in the upper green area with only the very
loudest parts of the recording just peaking into the red area. This will give you a good balance of volume and
preserve the dynamic range of the recording. Do not record with the signal constantly going into the red as
you will be effectively clipping off and losing a lot of audio data that you want to preserve.

== Recording the Audio ==

=== Time to record ===
If everything checks out up to this point then get your tonearm cued up at the beginning of the A side of the
record and press the red 'rec' gadget. Now you will notice your hard drive LED flashing as well as the virtual
HD LED in the recording window. This means that audio is being saved onto to your hard drive. You can now
lower the tonearm down at the lead in groove and start sending audio data to the software. Once you reach the
end of the LP side you can press the stop gadget to stop recording and save your sample. When the requestor
asks if you want to keep the sample select 'okay' and give it a filename.

== Editing the audio waveform ==

=== Getting ready to edit ===
At this point we will begin to break up the large audio stream into the individual music tracks that make up
the album side. You need to close the recording panel to continue. The rest of the work will mostly be done
in the Time Line Display.

=== Viewing and playing back the audio waveform ===
After recording you will see a visual representation of the audio you
just recorded in the timeline display.

[[File:ae4_timeline.png|600px]]

First its a good idea to expand the track display until you can see the track
we are working on better.

[[File:ae4_expandtrack.png|alt=Expand track icons]]

Also adjust the zoom level so that you can see the silent gaps between the
songs better. Generally a zoom level of 8 or so is ideal.

[[File:ae4_zoom.png|alt=Zoom bar]]

The scroll bar at the bottom of the window is used to scroll left/right
through the audio data currently displayed.

[[File:ae4_scrollbar.png|alt=ScrollBar]]

You can listen to any part of the waveform clicking the play icon
on the control window or pressing the space bar. Pressing stop icon
or space bar again will halt playback.

[[File:ae4_play.png|alt=Play icon]]

Set your starting playback position by clicking into the timing ruler
at the top of the waveform. You can also click and drag the green
time marker around for fine adjustment of your current playing
position.

[[File:ae4_timemarker.png|alt=Time marker]]

=== Trimming lead in and lead out===

First thing we need to do is trim off the empty junk at the beginning and
end of our LP side. So we need to find out where the first song starts
visually and by listening. We then want to seperate this lead-in area from
the actual start of the first song. We will use the split tool to achieve this

[[File:ae4_split.png|alt=Split file tool]]

Put the editor into split mode by selecting the gadget first. Now as
you hover the mouse pointer over the waveform you will see a dotted
line that demonstrates where a split can be made.

[[File:ae4_splitmarker.png|alt=Split marker dotted line]]

Line up the dotted line just before the start of the first audio data
we want to keep and click once. Now change the edit mode back to
grab/move before continuing just so you don't accidentally make more
splits by clicking on the waveform again.

[[File:ae4_grabmove.png|alt=Grab move tool]]

Now you may notice that we have two seperate pieces of audio data
sitting next to each other at the split point. Lets remove the lead in section.
Simply click the junk data to select it and then press the delete key or right
click to bring up the Actions menu and select Remove. Presto it's gone and
we are left with only the part we want to keep.

Scroll to the end of the LP side and using a similar process remove
the lead out at the end of the LP. So to recap, listen and look for when the
last song ends. Select split tool and click once where you want to
split the data. Then switch back to grab/move mode. Finally select and
remove the lead out portion.

=== Seperating the audio tracks ===
At this point we are have the complete audio that we want to keep
with the lead in and lead out trimmed off. Next we want to split
the one large waveform into seperate song tracks. This is easily
achieved by finding the silent parts between each song track
visually and listening and then making a split just a little
before the start of each song.

[[File:ae4_splittrack.png|alt=Split tracks example]]

=== Saving the audio tracks ===

Now you can proceed to select each song by clicking on the sample
data once and then right clicking and selecting the 'Save To Disk'
option for each track. Give the tracks meaningful names like this.

Congratulations you have now recorded, trimmed and saved out all
of the songs from one side of an LP. Now you can repeat this prodedure
for Side B.

== Converting to MP3 files ==

So next thing you are asking is how am I going to make these into
MP3 files. I suggest the freeware program TheMpegEncGUI. You can
specify a list of input files where you can select the AIFF audio
files that you previously saved to disk and then you can batch
encode the lot of them in one fell step. I suggest using joint
stereo 256Kbps encoding for good quality MP3 playback.

File:Ae4 grabmove.png

2012-04-11T22:05:44Z

Realstar:

File:Ae4 splitmarker.png

2012-04-11T21:58:51Z

Realstar:

File:Ae4 splittrack.png

2012-04-11T21:58:39Z

Realstar: uploaded a new version of "File:Ae4 splittrack.png"

File:Ae4 splittrack.png

2012-04-11T21:55:38Z

Realstar: